Scale Set Filter

The flir-filter-scale-set plugin is a filter that allows a scale factor and an offset to be applied to numerical data where an asset has multiple data points. It is very similar to the flir-filter-scale filter, which allows a single scale and offset to be applied to all assets and data points. It’s primary uses are for adjusting values to match different measurement scales, for example converting temperatures from Centigrade to Fahrenheit or when a sensor reports a value in non-base units, e.g. 1/10th of a degree.

Scale set filters are added in the same way as any other filters.

• Click on the Applications add icon for your service or task.

• Select the scale-set plugin from the list of available plugins.

• Name your scale-set filter.

• Click Next and you will be presented with the following configuration page

• Enter the configuration for your change filter

  • Scale factors: A JSON document that defines a set of factors to apply. It is an array of JSON objects that define the scale factor and offset, a regular expression that is matched against the asset name and another that matches the data point name within the asset.

    Name	Description
    asset	A regular expression to match against the asset name. The scale factor is only applied to assets whose name matches this regular expression.
    datapoint	A regular expression to match against the data point name within a matching asset. The scale factor is only applied to assets whose name matches this regular expression.
    scale	The scale factor to apply to the numeric data.
    offset	The offset to add to the matching numeric data.

• Enable the scale-set filter and click on Done to activate your plugin

Example

In the following example we have an asset whose name is environment which contains two data points; temperature and humidity. We wish to allow two different scale factors and offsets to these two data points whilst not affecting assets of any other name in the data stream. We can accomplish this by using the following JSON document in the plugin configuration;

{
  "factors" : [
     {
       "asset"     : "environment",
       "datapoint" : "temperature",
       "scale"     : 1.8,
       "offset"    : 32
     },
     {
       "asset"     : "environment",
       "datapoint" : "humidity",
       "scale"     : 0.1,
       "offset"    : 0
     }
  ]
}

If instead we had multiple assets that contain temperature and humidity we can accomplish the same transformation on all these assets, whilst not affecting any other assets, by changing the asset regular expression to something that matches more asset names;

{
  "factors" : [
     {
       "asset"     : ".*",
       "datapoint" : "temperature",
       "scale"     : 1.8,
       "offset"    : 32
     },
     {
       "asset"     : ".*",
       "datapoint" : "humidity",
       "scale"     : 0.1,
       "offset"    : 0
     }
  ]
}

See Also

flir-filter-ADM_LD_prediction - Filter to detect whether a large discharge is required for a centrifuge

flir-filter-breakover - Filter to forecast the possibility of a breakover.

flir-filter-conditional-labeling - Attach labels the reading data based on a set of expressions matched against the data stream.

flir-filter-ednahint - A hint filter for controlling how data is written using the eDNA north plugin to AVEVA’s eDNA historian

flir-filter-enumeration - A filter to map between symbolic names and numeric values in a datapoint.

flir-filter-expression - A FLIR Bridge processing filter plugin that applies a user define formula to the data as it passes through the filter

flir-filter-fft - A FLIR Bridge processing filter plugin that calculates a Fast Fourier Transform across sensor data

flir-filter-log - A FLIR Bridge filter that converts the readings data to a logarithmic scale. This is the example filter used in the plugin developers guide.

flir-filter-metadata - A FLIR Bridge processing filter plugin that adds metadata to the readings in the data stream

flir-filter-normalise - Normalise the timestamps of all readings that pass through the filter. This allows data collected at different rate or with skewed timestamps to be directly compared.

flir-filter-omfhint - A filter plugin that allows data to be added to assets that will provide extra information to the OMF north plugin.

flir-filter-python35 - A FLIR Bridge processing filter that allows Python 3 code to be run on each sensor value.

flir-filter-rms - A FLIR Bridge processing filter plugin that calculates RMS value for sensor data

flir-filter-specgram - FLIR Bridge filter to generate spectrogram images for vibration data

flir-filter-statistics - Generic statistics filter for FLIR Bridge data that supports the generation of mean, mode, median, minimum, maximum, standard deviation and variance.

flir-filter-vibration_features - A filter plugin that takes a stream of vibration data and generates a set of features that characterise that data

flir-south-Expression - A FLIR Bridge south plugin that uses a user define expression to generate data